Frozen North Posted September 14, 2019 Posted September 14, 2019 I have been using a wineador now for 3 years. It has not moved location since being set up. It was holding a steady 64% humidity for a long time. Recently, it has now gone up to 68%. I can’t figure out why the increase. Any ideas would be appreciated.
LLC Posted September 14, 2019 Posted September 14, 2019 A temp drop. Same thing I was thinking. Sent from my iPhone using Tapatalk
havanaclub Posted September 15, 2019 Posted September 15, 2019 Could also be if you recently added some wet sticks or boxes. Also if battery is low on hydro I find readings can be off. Sent from my iPhone using Tapatalk
PrairieSmoke Posted September 18, 2019 Posted September 18, 2019 Another possibility is the ambient humidity. If you have been repeatedly opening the door when the outside RH is high then it can saturate your humidor. 1
Targetshot28 Posted September 28, 2019 Posted September 28, 2019 Another possibility is the ambient humidity. If you have been repeatedly opening the door when the outside RH is high then it can saturate your humidor.I get this happening a lot. Sent from my iPhone using Tapatalk
komodo Posted October 10, 2019 Posted October 10, 2019 It happens to me as well. Humidity is relative to temperature, so as temp goes down, relative humidity goes up. So don't be in panic mod. Are you using beads to maintain humidity? A relatively full humidor with plenty of beads should stay stable pretty easily unless you are opening it constantly or have added wet sticks as havanaclub already mentioned.
Targetshot28 Posted November 8, 2019 Posted November 8, 2019 I’m using a cigar oasis 3.0. Which has had its issues in its own Right now I have it in the middle of my wineador. It set at 69%RH but holds at 72%. I have two other hygrometers. One at top usually the same reading. The bottom one usually 2% more. I don’t know what the issues are Sent from my iPhone using Tapatalk
PigFish Posted November 16, 2019 Posted November 16, 2019 Does your system dehumidify? If no, that is a problem! As intimated above. If you wish to debug one of these devises, you need to post more data about your ranges of temperatures and rH both in and out of the humidor. Cheers! -Piggy
Targetshot28 Posted December 25, 2019 Posted December 25, 2019 More cigars less issues. Steady last three weeks. Added 80 more sticks in. Sent from my iPhone using Tapatalk
Burningman Posted December 25, 2019 Posted December 25, 2019 On 11/16/2019 at 9:11 AM, PigFish said: Does your system dehumidify? If no, that is a problem! As intimated above. If you wish to debug one of these devises, you need to post more data about your ranges of temperatures and rH both in and out of the humidor. Cheers! -Piggy +1 It will also be difficult to control if it's on the empty side. Add some empty boxes to take up some space if possible.
PigFish Posted December 26, 2019 Posted December 26, 2019 On 12/25/2019 at 7:46 AM, Burningman said: +1 It will also be difficult to control if it's on the empty side. Add some empty boxes to take up some space if possible. A true working actively controlled humidor does not require contents. My humidors work full or empty. Humidors requiring contents to stabilize themselves is just one more compromise that the industry has piled on the consumer as they sell things that don't work. In my world the packed full humidor does not work well. This is because one wants control over their contents, not contents having control over the humidor. The distinction is important. The full humidor does not allow for airflow/water vapor flow. If you cannot move the variables that control your space, air and water vapor, then you have no control over your humidor. Cheers! -the Pig 1
Burningman Posted December 26, 2019 Posted December 26, 2019 28 minutes ago, PigFish said: A true working actively controlled humidor does not require contents. My humidors work full or empty. Humidors requiring contents to stabilize themselves is just one more compromise that the industry has piled on the consumer as they sell things that don't work. In my world the packed full humidor does not work well. This is because one wants control over their contents, not contents having control over the humidor. The distinction is important. The full humidor does not allow for airflow/water vapor flow. If you cannot move the variables that control your space, air and water vapor, then you have no control over your humidor. Cheers! -the Pig That's because your Kung Fu is greater! I use beads and or Bovedas. It takes longer for them to rebound when the box is empty. I keep it super simple since I do not require temp control.
PigFish Posted December 26, 2019 Posted December 26, 2019 52 minutes ago, Burningman said: That's because your Kung Fu is greater! I use beads and or Bovedas. It takes longer for them to rebound when the box is empty. I keep it super simple since I do not require temp control. You are confusing Kung Fu with Feng Shui... Lord, what you people would do with out me...! -LOL You make an important point here. What matter is not what any one of us does. What matters is what works for you. I coined the term here, the heuristic humidor. One should use what experience has taught him is best for him(her).... Have a great New Year mate! -Piggy 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now