Bennettjohnl Posted August 9, 2016 Posted August 9, 2016 On 8/9/2016 at 8:32 AM, TabacoLibre said: Could you show where the sheet of cedar is attached please? I am considering purchasing the Whynter CWC-351DD (half frigador half wine cooler) but it's maximum temp in 66F. Idk if that's too cool or if should be good enough. Also trying to figure out how to make it work perfectly with as little tweaks as possible (I like my humidity around 70%) Here is a look at walmart: http://www.walmart.com/ip/Whynter-16-Bottel-Dual-Zone-Freestanding-Wine-Refrigerators/52399700?wmlspartner=wlpa&selectedSellerId=3&adid=22222222227040410781&wl0=&wl1=g&wl2=c&wl3=87873030410&wl4=pla-203956708610&wl5=9021740&wl6=&wl7=&wl8=&wl9=pla&wl10=8453308&wl11=online&wl12=52399700&wl13=&veh=sem#about Expand Picture is from above post. When I first started I was all about 70/70 which made things tough when I got this thing. I'll just about guarantee if you try to maintain 70rh/66f your sticks will be wet. I used some short finishing nails bent at 90deg to hang on the vents. 1
ctozzi Posted May 1, 2017 Posted May 1, 2017 Any updates on this ? I'm thinking of getting a Wynter unit and I live in vegas with temps always higher than elsewhere. The internal temperature regulation is what's most important to meSent from my iPad using Tapatalk 1
drunkbuckeye Posted May 5, 2017 Posted May 5, 2017 I've had my whynter for a year and 5 months and it holds temp and rh. If it helps I lived in Atlanta, GA with hot humid summers and recently moved to LA. Still no issues. I used HF beads if that matters.
ctozzi Posted May 6, 2017 Posted May 6, 2017 Where do you guys get the bags that you put in the bottoms of your coolers with beads in them to catch any condensation?Sent from my iPhone using Tapatalk
ctozzi Posted May 6, 2017 Posted May 6, 2017 Thank you, ordered someSent from my iPhone using Tapatalk
havanaclub Posted May 6, 2017 Posted May 6, 2017 I have a newair fridge and use HF beads. I have found the single most important component to stabilize humidity and avoid any condensation are FANS. Good air flow does the trick. I bought off amazon CPU blower fans with a timer. Set them to run 10 mins every hour. Works like a charm. I can take a photo of the fans and set up if anyone needs help. Sent from my iPhone using Tapatalk
ctozzi Posted May 6, 2017 Posted May 6, 2017 Can you link me the fan with timer. I have a bunch of boxes and will eventually need more airflow. So far looks like exactly what I wanted :Sent from my iPhone using Tapatalk 1
Bsonwine Posted October 28, 2017 Posted October 28, 2017 Helpful thread. Is anyone using boveda in these? Are beads the consensus. Thanks for the input.
Head83 Posted November 9, 2017 Posted November 9, 2017 On 5/6/2017 at 7:21 PM, havanaclub said: I have a newair fridge and use HF beads. I have found the single most important component to stabilize humidity and avoid any condensation are FANS. Good air flow does the trick. I bought off amazon CPU blower fans with a timer. Set them to run 10 mins every hour. Works like a charm. I can take a photo of the fans and set up if anyone needs help. Sent from my iPhone using Tapatalk Expand I second this, any chance you could send some pictures of your fan setup??
havanaclub Posted November 10, 2017 Posted November 10, 2017 On 11/9/2017 at 9:28 PM, Head83 said: I second this, any chance you could send some pictures of your fan setup?? Sure. When I get a chance I will snap a pic and post it up for you. Sent from my iPhone using Tapatalk
havanaclub Posted November 15, 2017 Posted November 15, 2017 On 11/9/2017 at 9:28 PM, Head83 said: I second this, any chance you could send some pictures of your fan setup?? Here you go. Got these CPU fans off amazon. Had to drill a hole in the back of the cooler and taped up the hole. They are on a timer to run on and off all day long. Think I have it going 10 mins every hour. Hope this helps. pM me if you have any question. Sent from my iPhone using Tapatalk 1
havanaclub Posted November 16, 2017 Posted November 16, 2017 On 11/15/2017 at 8:31 PM, Head83 said: Thank you very much, very helpful!!No problem. Ya I placed them at the back facing and blowing upwards. There is a bottom draw that fits in. Perfect spacing. Sent from my iPhone using Tapatalk
TNT009 Posted November 16, 2017 Posted November 16, 2017 On 10/28/2017 at 4:43 PM, Bsonwine said: Helpful thread. Is anyone using boveda in these? Are beads the consensus. Thanks for the input. Expand Thats what I was wondering as well!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now