Recommended Posts

Posted
Thanks for the post. Very useful. I don't think my freezer is cold enough as it is a regular household freezer. Do you think 3.5 days is enough? Should I re-freeze the rest of the batch? I have them quarantined at the moment.

 



Hey Luca. I am not an expert at this. I just did some research when I had an issue. What I noticed that was interesting, these little buggers adapt to their environment like anything in the world and it took longer to kill the "acclimated larval". My freezer just got down to -6C. So if I had some stubborn little critters I probably didn't have complete destruction as I didn't leave my cigars in for weeks.
I would just quarantine and monitor the ones you froze. If you see another outbreak try to do another longer or deeper freeze. Just my opinion. No expert here. Just based on that data I posted.


Sent from my iPhone using Tapatalk
  • Like 1
Posted
I had a beetle hole in one of my RACA sticks and i didnt notice it initially until i saw fine dust on my lap.

I froze all the sticks and the vendor was kind to refund me the damaged stick. 



The vendor got back to me and asked me to return the cigars. Very nice of them! I'll be mailing them off next week.

Sent from my SM-G935F using Tapatalk

Posted
36 minutes ago, Luca said:

 


The vendor got back to me and asked me to return the cigars. Very nice of them! I'll be mailing them off next week.

Sent from my SM-G935F using Tapatalk
 

 

Hi Luca,

Whats the go here with customs? If you paid duties on the first delivery will you have to pay duties upon receiving the replacement?

  • Like 1
Posted
12 hours ago, Luca said:

Thanks for the post. Very useful. I don't think my freezer is cold enough as it is a regular household freezer. Do you think 3.5 days is enough? Should I re-freeze the rest of the batch? I have them quarantined at the moment.

 

My fridge freezer gets down to -18C.

  • Like 1
Posted
My fridge freezer gets down to -18C.



What brand/model fridge is it Fuzz?

Sent from my SM-G935F using Tapatalk

Posted
Hi Luca,

Whats the go here with customs? If you paid duties on the first delivery will you have to pay duties upon receiving the replacement?



Yes pretty much. It's my problem not the vendors. Ahhh Australia... :(

Sent from my SM-G935F using Tapatalk

Posted
10 hours ago, Luca said:

I've never smoked ones with holes in them. What was it like?

Absolutely no difference other than remembering to plug hole with each draw.

  • Like 1
Posted
9 hours ago, Luca said:

 


What brand/model fridge is it Fuzz?

Sent from my SM-G935F using Tapatalk
 

Westinghouse WSE6100SA. The freezer can be set to -23C, but it really doesn't get that cold. Lowest temp I have gotten it down to is -21C.

  • Like 1
  • 8 months later...
Posted

@DirtyHarry this is the post I was talking about. Have a look at @havanaclub post which talks about the time required to kill beetles in the freezer (on page 1 of this thread).

Luca

  • Like 1
Posted

Commercial refrigeration walk-in freezers are always set at -18 C ( 0 F), unless otherwise instructed by the owner for any odd reason. This temperature is a usual requirement. We don't usually see anything lower than this, unless it is an ultra-low set up of -40 and below.

Your deep freeze ( chest freezer) at home will also run down to that same temp, if you turn the temp adjusting knob down as well. The freezer portion of your fridge, usually gets between -14 C and -18 C, but it opens up more often.

Just so you all know; there is no difference between your deep freeze and a commercial walk-in freezer, other than the walk-in uses active cooling ( fans ) to blow the air around. They both should opperate at the same temps. No worries. So go ahead and freeze your stuff at home, and if unsure, and you are using the obove pictured time/temp stat, leave them in for a bit longer.

Hope this helps a bit.

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.

Community Software by Invision Power Services, Inc.